How to Fix Canon Printer Not Printing Color Issue - Experts Guide

Canon printers offer a great printing experience. However, sometimes issues arise in the print outputs. Users commonly complain about Canon printer not printing color. The outputs are blurred with wrong colors or no color. But this print quality issue is fixable. There are a few effective workarounds to use to troubleshoot their causes. Keep reading to know different ways to overcome this print output problem with Canon printers.

5 Methods to Fix Canon Printer Not Printing Color

Use these solutions to eliminate the printer issue and get quality outputs.

1. Perform a nozzle check pattern printing.

If you find an improper nozzle check pattern printout, find out whether any color ink tanks are empty. However, clean the printhead if the tanks are full or have a lot of ink, but the printer still doesn’t print.

After that, print the nozzle check pattern again to find out whether the ink is ejected properly. If still, you face the same issue, perform printhead cleaning again. You can opt for the printhead deep cleaning. After that, turn off the printer and perform deep cleaning the next day.

2. Turn on the color printing settings.

You may find that the Canon printer is not printing color if you haven’t enabled the color printing option.

● Tap the ‘Start’ button on your system.

● Launch the ‘Settings’ tab.

● Here, click on ‘Printers and Scanners.’

● Now, from the list of printers, choose your Canon printer.

● Tap the ‘Properties’ tab.

● Find if you’ve turned on the color printing option.

● If not, enable it and print a test page.

3. Restart the Canon printer

Some issues, like problems in print quality and the printer being unresponsive can be fixed by performing a hard reset. So, if you notice your Canon printer offline, do a hard reset. This will also delete the print data in all the interfaces.

● Press the ‘Reset button present on the ‘Control Panel.’

● There will be two menus; ‘Reset’ and ‘Soft Reset.’

● Choose ‘Soft Reset.’

● After that, hold down the ‘OK’ button.

● Do it till hard reset is displayed.

● When you see it, release the button.

● The hard reset will be finished after ‘<03 HARD RESET>’ disappears.

● Now, check if your printer has become responsive.

4. Update the printer driver.

Faulty printer drivers also prevent Canon printers from responding. Printer offline, and issues in print quality can be fixed by updating Canon printer drivers.

● Open the ‘Device Manager’ section.

● Do so by holding the Windows key and R.

● Locate your printing device below ‘Print Queues.’

● Right-click on your Canon printer.

● Choose ‘Update Driver.’

● Choose to search automatically for driver updates.

● After that, restart your system.

● Restart the Canon printer as well and check if it becomes responsive.

5. Examine the ink cartridge.

● Access the cartridge by opening the printer’s door.

● Remove the cartridge and replace it with the correct ink.

● Now, place the cartridge in its slot back.

● Give a color test print command.

Final Words

Hopefully, now you can easily fix the Canon printer not printing color correctly error. All the resolutions above are fairly easy to implement and do not require much technical expertise. However, consult a printer technical support expert if you still find the problem after performing these measures.

Frequently Asked Questions

1. Why is my Canon printer not printing in color?

Your Canon printer may not print in color due to clogged nozzles, empty or faulty cartridges, or incorrect printer settings. Try cleaning the printhead, ensuring color ink cartridges are installed properly, and checking the printer settings to confirm color printing is enabled.

2. How do I fix my Canon printer not printing color?

To fix color printing issues, clean the printhead using the printer's maintenance settings, replace low or damaged ink cartridges, and ensure the correct paper and print settings are selected. Also, update printer drivers and restart the device for better results.

3. Can a clogged printhead cause my Canon printer to stop printing color?

Yes, a clogged printhead can block ink flow, preventing color printing. Run a printhead cleaning cycle through the printer’s settings or manually clean it using a lint-free cloth and warm water. Perform a nozzle check to confirm if the issue is resolved.

4. Why does my Canon printer print black and white but not color?

Your printer may be set to grayscale or black-and-white mode. Check your print settings in the printer properties and ensure "Color" is selected. Additionally, low or dried-up color ink cartridges and clogged nozzles can cause this issue. Replacing or cleaning the cartridges may help.

5. How do I reset my Canon printer to fix color printing issues?

To reset your Canon printer, turn it off, unplug it for a few minutes, then restart it. You can also perform a factory reset through the printer’s menu settings. This can resolve software glitches affecting color printing. Ensure drivers are updated for optimal performance.

4o